Multidisciplinary efforts, combining microfabrication, chemistry and molecular biology, have been recently focused on the development of large electrode arrays loaded with oligonucleotide probe to allow rapid analysis of nucleic acid samples. Different micromachining techniques can be used for obtaining the inlet, outlet and main reservoirs for the analyte. In the present work silicon wafers are used as substrates for the microarrays, patterned by means of direct writing or optical lithography. Three methods are developed in order to obtain reservoirs with depths ranging from 5 microns to 200 microns, allowing an analyte volume in the range of 1 nl to 1 ml: reactive ion etching of a polyimide layer, wet anisotropic etching of silicon, respectively deep wet isotropic etching of the glass cover. The glass cover is bonded at low temperature, using spin-on glass as adhesive and ensures a protection of the analyte, as well as a …